Sub-Zero & Viking Repair of Calabasas

Calabasas Dryer Repair

Dryer Repair

Sub-Zero & Viking Repair of Calabasas is a family-owned dryer repair service with more than 10 years of experience. We repair gas and electric dryers (front-load, stackable and compact) for homes across Calabasas and nearby communities.

Satisfaction Guaranteed, Service You Can Trust!

Don’t wait. Schedule your appliance service today!

Mon to Sun (8:00 am – 8:00 pm)

Dryer Repair in Calabasas, CA

The bottom line is that we repair gas and electric dryers that won’t heat, take too long to dry, make noise, won’t start or shut off mid-cycle, from Whirlpool, Maytag, LG, Samsung, Bosch, Miele, Electrolux and other brands. We check the exhaust vent on every visit, most repairs take one visit, and you approve the price before any work begins.

Who this page is for: households whose dryer takes two cycles to dry a load, anyone whose dryer feels unusually hot or smells of burning, landlords and property managers with in-unit or shared laundry, and small businesses that run a dryer every day. Typical use cases include a dryer that runs but stays cold, clothes that need two cycles, loud thumping or squealing and a dryer that shuts off mid-cycle. Use it to find the likely cause, spot the warning signs of a fire risk and decide when to call.

Dryer symptom, likely cause and what to check first
SymptomLikely causeWhat you can check first
Tumbles but no heatBlown thermal fuse, failed heating element or gas igniter, tripped breakerCheck both breakers for an electric dryer, or that the gas valve is open
Takes two cycles to dryBlocked lint screen or exhaust vent, weak heatingClean the lint screen and check the outside vent flap opens
Very hot to the touch or burning smellRestricted vent or failed cycling thermostatStop using it and call; this is a fire risk
Squealing, thumping or grindingWorn drum rollers, belt or idler pulleyNote when the noise happens before you call
Won’t startDoor switch, thermal fuse, start switch or motorMake sure the door closes fully and the breaker is on

What Dryer Problems Do We Fix?

The short answer is that we most often fix overheating, no heat, not starting, noise, slow drying and shutting off mid-cycle. These are the dryer problems we fix most often, with their usual causes:

1.

Dryer Overheating

A dryer that runs too hot can scorch clothes and is a fire risk. A clogged vent, a failed cycling thermostat or a shorted heating element is usually the cause.

2.

Dryer Not Heating

If your dryer tumbles but stays cold, an electric model usually has a burned-out heating element, a blown thermal fuse or a tripped half of the 240-volt breaker; a gas model usually has a failed igniter or gas valve coils. A thermal fuse that keeps blowing almost always means a restricted vent, so we fix the cause, not just the fuse.

3.

Dryer Not Turning On

When a dryer won’t start, we check the door switch, thermal fuse, start switch, drive motor and control board, along with the power supply at the outlet and breaker.

4.

Strange Noises or Vibrations

Squealing, thumping or grinding usually points to worn drum rollers or bearings, a frayed drive belt, a worn idler pulley or a failing motor. Fixing it early prevents damage to the drum and motor.

5.

Clothes Not Drying Properly

Clothes that stay damp after a full cycle usually mean a clogged lint screen or vent, a weak heating element or gas valve, or a moisture sensor that is coated with residue.

6.

Dryer Turning Off Mid-Cycle

A dryer that shuts off mid-cycle is usually overheating because of a restricted vent, or has a failing motor, thermostat or timer.

Why Is Professional Dryer Repair Important?

Dryers combine 240-volt wiring or a gas supply with high heat, so a wrong repair can create a real hazard. A professional repair gives you:

1. Accurate Diagnosis

We test heating, airflow, sensors and controls to find the real cause, so you don’t pay for trial-and-error parts.

2. Longevity and Efficiency

Replacing a worn belt, rollers or thermostat before they fail completely extends the life of the drum and motor.

3. Lower Energy Bills

A dryer with a clogged vent, a failing heating element or a faulty moisture sensor runs longer than it should and wastes electricity or gas. Fixing the cause can cut drying times noticeably and lower your utility bills.

4. Time-Saving Solutions

We carry common dryer parts such as belts, rollers, thermal fuses, igniters and heating elements, so most repairs are finished in one visit.

5. Preventing Safety Hazards

According to the U.S. Fire Administration, failure to clean the dryer is the leading cause of home clothes dryer fires. We check the vent and safety components on every visit.

6. Cost-Effective Repairs

Most dryer repairs cost far less than a new dryer, especially for common failures like belts, fuses and heating elements.

What Dryer Repair Services Do We Offer?

We offer inspection, component repair, vent and duct cleaning, sensor and thermostat fixes, electrical troubleshooting and routine maintenance for electric and gas dryers from all major brands. Our services include:

From our service calls: for example, most “no heat” calls on electric dryers turn out to be a blown thermal fuse, and a fuse that keeps blowing almost always points to a restricted vent. Most noisy dryers have worn drum rollers or a frayed belt.

1.

Thorough Inspection

We check heating, airflow, motor, drum support and controls to identify the exact fault.

2.

Component Repairs and Replacement

We repair or replace faulty components, from drum belts to thermal fuses, using high-quality parts that meet your dryer’s specifications.

3.

Vent and Duct Cleaning

Proper airflow is essential for your dryer to function efficiently. We clear clogged vents and ducts to prevent overheating or extended drying times.

4.

Sensor and Thermostat Fixes

We test and replace faulty thermostats, thermistors and moisture sensors so the dryer heats and shuts off correctly.

5.

Electrical Troubleshooting

For dryers that won’t start or have flickering controls, we diagnose and fix electrical issues to restore your appliance’s entire operation.

6.

Routine Maintenance

We clean lint from inside the cabinet, check the vent run and advise you on keeping the dryer running safely.

How Does Our Dryer Repair Process Work?

You call, we diagnose the fault on site, explain the repair and price, then fix the dryer and check that the vent is moving air. Here is each step:

1. Initial Contact

Call (310) 209-8148 to schedule your dryer repair. We’ll discuss your concerns and schedule a convenient visit.

2. On-Site Diagnosis

Our technician examines the dryer and tests the likely causes to pinpoint the fault.

3. Detailed Explanation

Once we identify the problem, we’ll explain it and discuss the recommended repairs and a fair estimate.

4. Professional Repair

We replace the failed parts and reassemble the dryer.

5. Final Inspection

We run the dryer to confirm it heats, tumbles and shuts off correctly, and that the vent is moving air.

Schedule Your Calabasas Appliance Repairs Today

Dryer not heating, drying or starting? Call +1 (310) 209-8148 to book a repair. Need help with the washer too? See our washer repair service.

How Can You Maintain Your Dryer?

Clean the lint filter after every load, keep the vent clear, avoid overloading and have the vent cleaned regularly. These habits help prevent the most common dryer problems:

1. Clean the Lint Filter

Make a habit of cleaning the lint filter after every cycle to improve airflow and prevent overheating.

2. Check the Vent

Inspect the dryer vent regularly for blockages. A clear vent helps maintain energy efficiency and safety.

3. Avoid Overloading

Overloading your dryer strains the components, leading to wear and tear. Stick to the recommended load size.

4. Use the Right Settings

Follow the manufacturer’s instructions for drying settings depending on the fabric type to avoid unnecessary damage.

5. Schedule Regular Service

Have the vent run cleaned about once a year, more often if the vent is long or has several bends.

How Do You Book a Dryer Repair?

For dryer repair in Calabasas and nearby communities, call +1 (310) 209-8148. We are available Monday to Sunday, 8 a.m. to 8 p.m.

Last updated: November 10, 2026

HAVE ANY QUESTIONS?

Frequently Asked Questions About Appliance Repair

Calabasas Appliance Repair FAQs

If your dryer shows any of these signs, it might require repair:

  • It’s not heating up, or drying clothes takes longer than usual.
  • It makes strange noises like grinding or squealing.
  • Your dryer drum doesn’t spin when turned on.
  • It shuts off mid-cycle.
  • There’s a burning smell or visible lint buildup.

Contact our team in Calabasas to diagnose and fix the problem quickly.

We specialize in the repair of various dryer types, including:

  • Electric dryers  
  • Gas dryers  
  • Stackable or compact dryers  
  • Commercial dryers  
  • Smart (Wi-Fi-connected) dryers  

Our skilled technicians in Calabasas have experience working with all major brands, ensuring your dryer is in good hands.

The repair time varies depending on the issue, but most common repairs, such as replacing parts or fixing wiring, take 1–3 hours. Our Calabasas-based team values your time and ensures prompt service to get your dryer running smoothly again.

The cost of repair depends on the issue and the required replacement parts. However, we offer competitive pricing in Calabasas with no hidden fees. After assessing your dryer, we’ll provide a transparent quote with a detailed explanation of costs so you can make an informed decision before proceeding.

Here’s why customers trust us for their dryer repair needs in Calabasas, CA:

  • Expert Technicians: Our team is highly trained and experienced.  
  • Prompt Service: We value your time and aim to resolve issues quickly.  
  • Affordable Prices: We offer transparent and fair pricing.  
  • Customer Satisfaction: Your satisfaction is our priority. We’re not happy until you are.
  • Comprehensive Repairs: We tackle various dryer issues for all major brands
Scroll to Top